*--

Kitchen Glass Splashbacks Mistakes You Shouldn’t Make

Splashes of water, oil, grease, and many other kitchen messes when cooking and preparing food are protected by kitchen glass splashbacks. These are panels of material positioned above the sink, hob, or cooking surface to protect the wall.

Splashbacks are no exception to the rule for kitchen design projects. There is always the potential for a mistake. The truth is, there aren’t any hard and fast rules when it comes to designing and installing your kitchen glass splashback. However, many people make mistakes that you should be aware of before spending any big money on anything. So, by describing some of the most common kitchen splashback blunders, we want to set the stage for your kitchen renovation’s success and avoid disappointment in the future.

Kitchen Glass Splashbacks

Get More Informations

Pattern

With kitchen glass splashbacks, you may experiment with designs that wouldn’t otherwise work in the rest of the room. When selecting which patterns would work best for you, it’s essential to keep an open mind. One of the most important things to remember is to experiment with new ideas while ensuring that they do not conflict with other patterns in your kitchen.

If your kitchen already has a lot of detailed designs, you should be cautious about adding a splashback with busy patterns. If you choose a dramatic granite countertop with a comparable glass splashback, it is impossible to avoid the impression that your kitchen is packed with texture and detail. Most people find it a little taxing on their senses, aesthetically speaking. Perhaps a more simple kitchen glass splashback would better match the busy kitchen counters.

Furthermore, an identical match between the splashback pattern and the flooring pattern might result in an appearance that is too similar. But this is dependent on the design being discussed. To maintain a sense of continuity, it is possible that specific matching patterns would be ideal for you. Nevertheless, consider that flooring patterns are often too big when utilized as splashbacks. In the end, there’s no right or wrong solution here: simply float several ideas and attempt to imagine them in the context of your kitchen.

Fitting

Installing kitchen glass splashbacks with basic designs shouldn’t take more than a few hours. However, you should avoid hurrying through the procedure and risking a faulty installation. Many individuals wind up with tiles that don’t fit appropriately between the counter and the cabinets. And this results in a splashback that is uncomfortable and cut off in the middle. This is especially true when it comes to more elaborate designs that demand a high degree of precision.

Take into consideration the position of plug outlets and light switches when measuring and installing your kitchen glass splashback. Disruption of their patterns might detract from their overall image. It is preferable if the margins of your outlets are flush with the grouting rather than cut across the grouting. If they disrupt the pattern, some of the panels will be split into weird shapes, detracting from your splashback’s regularity and flow.

Splashbacks built from a single solid slab of the material of your choice should be measured and fitted by a qualified specialist to ensure appropriate fit and function. Because they are dangerous to handle on your own, it is not only impossible to get their dimensions precisely correct without the help of skilled fitters.

Kitchen Glass Splashbacks

Read More

Material

How well the material holds up against a sputtering blender, a spitting skillet, or a boiling kettle is something you should consider. Send out a request for samples from your suppliers. And then test each one against your existing splashback for a week or two to see how well it handles the daily assault of kitchen trash. You should only use the material in your own kitchen if it is both aesthetically pleasing and useful. On the other hand, kitchen glass splashbacks are the recommendation of many professionals in this situation.

Location

Decide on where you want your kitchen glass splashback to be installed first. For practical considerations, most people install kitchen glass splashbacks behind the sink and the stove. And that’s because these are the locations most likely to generate large volumes of moisture. On the other hand, splashbacks are not always confined to these specific places. You may choose whether or not you want your splashback to span the whole width of your counter. Or, if you just want it to cover the most efficient portions of your kitchen, ascertain the answers to these questions before making any major judgments to ensure that you do not end up with a splashback in the wrong spot.

Colours

The glass splashback in your kitchen is an excellent tool for establishing the color scheme of your kitchen space. This palette might inspire the colors you pick. And they could serve to connect the countertops to the cabinets by introducing a constant color in the space between them. However, they may also provide a dash of color to your home, distinguishing your splashback from the rest of the room while simultaneously bringing attention to the subtle parallels between the two. For example, in a kitchen with neutral tones, a backsplash provides a chance to incorporate some bright primary colors without detracting from the room’s overall look.

Always keep in mind that lighting might have an impact on the color of your kitchen glass splashbacks. Your counter area may seem darker than it did before installation because of its location in the rear. The splashback will take on a whole new appearance when the task lighting is turned on. Once again, consider installing a sample in your kitchen to observe how the light reflects off the splashback in real-world conditions. In addition, keep an eye out for the color of any appliances or decorations on the countertop since they may conflict with the color of your kitchen glass splashback.

Related Posts